To display the timer setting Press SHIFT+TIMER on the remote control. The timer-on time, the source and the timer-activated duration are displayed for 6 seconds.
Timer recording
Timer recording is available only for TUNER and VIDEO/AUX (with an external timer) sources.
1 On the remote control, press SHIFT+TIMER repeatedly to display " REC" and press ENTER.
If ENTER is not pressed within 6 seconds, you will exit the timer setting mode and the previous setting, however, is entered. On the unit, press MODE repeatedly to display "TIMER", and press ENTER within 4 seconds.
Tip: Timer setting can be displayed even while the unit is turned off, and at that time if you press ENTER or a within 6 seconds after SHIFT+TIMER is pressed, you can enter the timer setting mode and change the setting.
To change the timer setting Re-set the timer again. To cancel the timer Press SHIFT+TIMER on the remote control repeatedly until " OFF" is displayed. "5" disappears from the display.
En
Then turn MULTI JOG within 6 seconds to select " REC", and press ENTER twice within 4 seconds. 2 Carry out step 2 to step 5 described in "Timer playback".
Tip: Your timer setting is retained even if the timer is canceled. Next time the timer is activated, you can change your previous
setting, or simply use the same setting again.
3 Prepare the source.
To record the radio, select the band and tune in to the desired station. To record external equipment connected to the VIDEO/ AUX jacks, set an external timer for the equipment so that its playback begins at the same time.
4 Insert the recording tape in DECK 2 and then turn the unit off. Tip:
The display is dimmed while the timer recording is active.
