NOBELS ODR-1 PLUS
Instrukcja Obsługi

Owners manual
-

Operation
Insert a 9V battery (6F22 / LR61) into the battery-compartment (2) or connect an electronically regulated 9V power supply adaptor to the DC jack (4). Power supply specifications: see imprint on bottom of unit. Connecting an instrument to the input jack (3) will automatically switch the unit on. Connect your amplifier to the output jack (6). Select your desired sound with the slide switch and the 3 control knobs (7, 8, 9,10). (see Sound examples) Pressing the pedal (1) switches the unit on or off. Instead of using this unit on the frontstage, you can place it with your equipment and control it with a standard momentary footswitch connected to the remote jack (5). Before changing the battery (2) always unplug the input jack (3) to switch the unit off. We suggest using a regulated 9V power supply adaptor to keep our environment clean.

ODR-1
Specifications

plus

Power 9V battery or power supply adaptor Consumption max. 11mA Input impedance 1Mohm Output impedance 2Kohm Max. input +6dB Switches / controls Plus, Drive, Spectrum, Level Jacks Input, DC, Remote, Output Remote momentary switch Display green LED indicator Dimensions 74mm x 126mm x 58mm Weight 455g (without Battery) Specifications are subject to change without notice!

Important notes
Avoid using this unit in extreme humidity, heat or dust. When the unit is not in use for longer periods, remove the battery (2) to prevent damage by leaking battery acid. Also unplug the input (3) to prevent wasting battery life when the unit is not in use.

Sound examples
1 That's cool

plus
plus

Drive

Spectrum

Level

Function
(3) IN: Inserting a mono jack switches the unit on. (4) 9V DC: For a regulated 9V power supply unit. (5) REMOTE: The ON / OFF-function can be remote controlled by a momentary switch, connected to the REMOTE jack (5). Intelligent switching devices (like the Nobels MF-2 or MS-4) can also activate the unit from remote. (6) OUT: This output delivers a low impedance output signal best for the input of your amplifier. (7) plus: Provides additional gain potential by extending the adjustment range of the DRIVE control! (8) DRIVE: Adjust this control to get sounds from slight crunch to full overdrive. (9) SPECTRUM: This control changes the amount of deep-mid and treble frequencies at the same time. In min. position you get warm mid-tones for a great blues sound. When turning the knob clockwise your sound becomes heavier, ideal for a lush hardrock sound. (10) LEVEL: Adjusts the output volume of the ODR-1 plus. (11) LED: This Led shows the state of the effect. LED on = Effect on.

2 Standard blues

plus

plus

3 Screaming blues solo

plus

4 Hardrock rhythm

plus

5 Heavy lead

KTA 040202-1507