Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 25 (kliknij aby zobaczyć)
How to Set Up your new HITACHI Plasma Television
AC CORD INSTALLATION INSTRUCTION The AC cord provided with your new Plasma Television needs to be installed correctly to avoid the AC cord from disconnecting when rotating the TV on its Table top stand. Located on the back of the TV are 2 plastic clamps to hold the AC cord. Please follow the instructions below.
³ Pass the AC cord through Clamp #1 and connect
it to the TV. Pull on the clamp to tighten the AC cord to the TV.
· The AC cord and the signal cables can all be held together with Clamp #2. » Depend on the model size 42",50" or 55", the clamp may be different shapes. Only for 50" models the clamp #2 will be included on the accessories bag.
³
Clamp #1 : Pass the AC cord through this clamp ; then pull the clamp to tighten the AC cord to the TV.
·
AC CORD
Clamp #2: Use this clamp to hold the AC cord and the signal cables. For 50 " model please
assemble this Clamp on the middle hole of the base metal.
