ASSEMBLY
Adjusting the harness Check before starting
You should always use the harness with the machine to give maximum control over the machine and reduce the risk of fatigue in your arms and back. � � � Put on the harness. Hook the machine onto the harness support hook. Adjust the length of the harness so that the support hook is roughly level with your right hip.
� � � �
Inspect the working area. Remove any objects that could be thrown out. Check the cutting attachment. Never use blunt, cracked or damaged equipment. Check that the machine is in perfect working order. Check that all nuts and screws are tight. Make sure the chain is adequately lubricated. See instructions under the heading Lubricating the cutting attachment. Check that the cutting attachment always stops when the engine is idling. Only use the machine for the purpose it was intended for. Make sure the handle and safety features are in order. Never use a machine that has any parts missing or has been modi�ed in relation to the speci�cation.
� � �
Filling with oil
� Open the cap on top of the bar head
� �
Fill with Husqvarna saw chain oil. Re�t the cap.
