SONY PCG-808
Instrukcja Serwisowa

21. Video test group Tests the circuit blocks related to the video display. (1) TV out test Tests to output the video signal from the TV-OUT terminal. The NTSC TV receiver is necessary. Connect the TV-OUT terminal to the NTSC TV receiver. Check that the color bar signal appears. (2) Video test Tests the various video modes. A part of display is not shown as the video signal is displayed partly outside the screen in some tests of LCD (i.e., 1024 x 768 mode) when using the SVGA (800 x 600) displays. But this is normal.

2-5. About the PASSWORD Bypass
When item �3: Return to START MENU� of the start menu is selected, the following display appears. Password Bypass Program © 1998 Sony Corporation All rights reserved. Input last 7 bytes of Serial number (if serial xxxxxxxx-ooooooo , input serial number � ooooooo) input serial number � Enter the lower seven digits of the serial number of your system. Then the following message appears. Bypassed pass word � @@@@@@@ Enter the lower seven digits of the serial number of your system into the @@@@@@@ portion of the password input display.

PCG-808 (UC)

2-8 (END)