jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
1-4.Replacing the CPU
1. Removing the CPU
1
2
3
2
1 Insert a screwdriver tip into the groove as shown and slant it in the direction of the arrow. NOTE: Do not use screwdrivers having a large tip than the width of the groove. Otherwise, it may cause the groove to be damaged. 2 The base under the CPU moves slightly in the direction of the arrow and the lock is released. 3 The CPU can be removed upward.
2. Installing the CPU
Attach the CPU while aligning the cut-out with this position.
2
1 3
3
1 Insert all pins of the replacement CPU into the holes of the base and push the CPU in the direction of the arrow. 2 Insert a screwdriver tip into the groove as shown and slant it in the direction of the arrow. 3 The base under the CPU moves slightly in the direction of the arrow and the CPU is locked.
NOTE: The DIP switch on the MBX-39 board (main board) is set to match with the CPU (8-759-697-16) that is used in this computer. (The upper position where ON indication is shown is the ON position . The lower position is the OFF position.)