jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 57 (kliknij aby zobaczyć)
5
6
7
8
[4] DIGITAL ASSY
Flowchart of Failure Analysis for The DIGITAL Assy
Failure analysis for the DIGITAL Assy => DG1
A
The on-screen display (OSD) is not properly indicated.
� If the OSD is not properly displayed although the panel mask is properly displayed, a failure exists in the path from the output of IC2801 on the MAIN Assy to IC3301 on the DIGITAL Assy. -> If only the OSD is abnormal, the MAIN Assy is in failure.
Disconnect and reconnect the 50P (J212) FFC/40P (J211) FFC. NG Replace the 50P (J212) FFC/ 40P (J211) FFC. NG Is an appropriate signal input? (Check the V frequency with the QSI command.) No Is the sync signal properly output from the MAIN Assy? No
� It is most likely that the video signal and sync signal data are abnormal.
B
Yes
� If no vertical sync signal is input to the DIGITAL Assy, a freeze-frame picture will be displayed.
No
Replace the DIGITAL Assy. NG OK
C
Replace the MAIN Assy.
Failure in connectors CN3201 or CN3202 on the DIGITAL Assy. Failure in ASIC (IC3301) on the DIGITAL Assy.
D
