PIONEER PDP-503HDG/TLDPBR
Instrukcja Serwisowa

PDP-503PE, PDP-503PU

Y DRIVE, SCAN (A), (B) Assy

1

Remove the three screws.

7 8 9

Remove the Rear Case (50P). (Screws � 19) Remove the Y DRIVE Assy. (Connector, Screws � 8) Remove the Front Chassis V. (Screws � 5) 9 Y DRIVE Assy

9 8
Front Case 50 (P)
�2

8

�2

2 3 4

Loosen a rivet. Remove the Lead Cover (P). Pull out a Flexible Cable.

1

�3

9 8
�2

8

�2

8

2
Lead Cover (P)

4

Rivet 3 Turn it not to press the rivet. (Because when the rivet presses, Lead Cover (P) fit in once again.) It is easy to remove when pull out the Lead Cover (P) with the rivet before completely removing the rivet.

5 6

Remove bottom by the fulcrum at the top of Front Case 50 (P). Remove the Front Case 50 (P).

10 Reverse the SCAN (A) and SCAN (B) Assemblies. 11 When it is necessary, exchange the ROM.
SCAN (A) Assy

Front Case 50 (P) ROM �6 Rear Case

6
Aluminum Materials It is the structure that a hook of Front Case 50 (P) was put between with Rear Case and aluminum materials.

10

10

5

SCAN (B) Assy

87