PIONEER PDP-50MXE10/TA5
Instrukcja Obsługi

PICTURE/SCREEN Adjustment
PICTURE adjustment
4
Press the SET button. Pressing the SET button writes the value into the memory and returns the display to the step 2 screen. When the setup is finished, press the MENU button to exit the menu screen.

5

Note
MENU 5/� 2/3 SET
MENU 2/3 SET 5/�

Make these adjustments for each input (INPUT1 or INPUT2) and signals.

[PICTURE] mode adjustment items Below are brief descriptions of the options that can be set in the [PICTURE] mode. CONTRAST ············· Adjust according to the surrounding brightness so that the picture can be seen clearly. BRIGHTNESS ·········· Adjust so that the dark parts of the picture can be seen clearly. R. LEVEL ················· Adjust the amount of red in the picture. G. LEVEL ················· Adjust the amount of green in the picture. B. LEVEL ················· Adjust the amount of blue in the picture. H. ENHANCE ··········· Sharpens the image in the horizontal direction. V. ENHANCE ··········· Sharpens the image in the vertical direction.

Main unit operating panel

Remote control unit

1

Press the MENU button to display the menu screen.
MENU PICTURE SCREEN : : : : : : : 0 0 0 0 0 0 0 SETUP CONTRAST BRIGHTNESS R.LEVEL G.LEVEL B.LEVEL H.ENHANCE V.ENHANCE PICTURE RESET INPUT1 OPTION

To reset [PICTURE] mode settings to the default
PICTURE/SCREEN Adjustment English
SET

ENTER

MENU

EXIT

2

Use the 5/� buttons to select the adjustment item, then press the SET button.
MENU PICTURE CONTRAST BRIGHTNESS R.LEVEL G.LEVEL B.LEVEL H.ENHANCE V.ENHANCE SCREEN : : : : : : : SETUP 0 0 0 0 0 0 0 INPUT1 OPTION

If settings have been adjusted excessively or the picture on the screen no longer appears natural, it may prove more beneficial to reset the [PICTURE] mode to default settings instead of trying to make adjustments under already adjusted conditions.

1

In step 2 in the previous procedure, use the 5/� buttons to select [PICTURE RESET], then press the SET button.

PICTURE RESET

SET

ENTER

MENU

EXIT

3

Use the 2/3 buttons to adjust the picture quality as desired.
SET

PICTURE RESET YES
SET
MENU

NO
EXIT

BRIGHTNESS
SET

:

0
EXIT

2

Use the 2/3 buttons to select [YES], and press the SET button. All [PICTURE] mode settings are returned to the factory set default.

24
En