TOSHIBA PDR-3300
Instrukcja Obsługi

Troubleshooting
Problem No power supply Causes The batteries are exhausted. The AC adapter plug has come out from the power outlet. The camera turns OFF during operation The batteries are exhausted. The battery runs out quickly You are using the camera in extremely cold conditions. Remedy Replace with new batteries. Plug the adapter back in.

Getting Taking Playing Erasing Handy Other Additional Ready Photographs Back Images Functions Applications Information

Replace with new batteries. Put the battery in your pocket or another warm place to heat it and then load it into the camera just before you take a picture. The terminals are dirty. Wipe the battery terminals with a clean, dry cloth. The battery has reached its effective life. Replace with new batteries. No photograph is taken when the shutter No SD Memory Card is loaded Load SD Memory Card. button is pressed The SD Memory Card is loaded incorrectly. Load the SD Memory Card correctly. Not enough space on the Load a new SD Memory Card. SD Memory Card . Erase photograph images or change the size and quality to increase space on the SD Memory Card. The SD Memory Card Remove the write-protection or replace is write-protected. with a new SD Memory Card. The SD Memory Card is not formatted. Format the SD Memory Card. The SD Memory Card is damaged. Load a new SD Memory Card. The Auto Power OFF function is Turn the power on again activated. I cannot use the flash to take pictures The mode dial has been changed to Set the mode dial to the correct setting. another setting.. The flash is set to Suppressed Flash Set the flash to Auto, Red-eye reduction mode or Forced flash mode. You pressed the shutter button while the Wait until charging is completed before flash was charging. pressing the shutter button The flash will not charge The camera is set to Suppressed Flash Set the flash to Auto, Red-eye Reduction mode. or Forced Flash mode. The batteries are exhausted. Replace with new batteries The playback image is too dark even The subject is too far away. Move closer to the subjects. though I used the flash (about 0.8m ~ 3.0m- WIDE setting) The playback image is blurred The lens is not clean Clean the lens. Set the FOCUS photography according to the distance up to the subject. The SD Memory Card is write-protected. Remove the write-protection. The frame is protected. Remove the write-protection. Cancel the DPOF setting. The SD Memory Card is write-protected. Remove the write-protection. Turn the power off and remove the batteries once, and try again. Set the mode dial to the correct setting. Press the POWER button again to turn the camera on. Change the camera to the photography or playback mode. Set the date and time again. The image is out of focus

I cannot format the SD Memory Card I cannot erase all the frames.

Nothing happens when I use the buttons Camera malfunction and switches The mode dial is not at the correct position. The camera is in the Auto Power OFF mode. Nothing is displayed even through the The camera is in the PC mode. LCD monitor is set to ON. The set date and time disappears. Both the battery and AC adapter are removed with the power still on.

- 131