Recording from anywhere on the disc
Here's how to record starting from any point on the disc:
6
Press REC MODE to switch between recording options.
There are two recording options: DISC REC � This will record the rest of the disc (or the rest of a playlist when using programmed play), starting from the point where you have paused the track. TRACK REC � This will record the rest of the track, starting from the point where you paused. If you want to switch the copying speed, do so here. The default is 2x speed. See Changing the recording speed on page 28 to change it. If you want to adjust the digital recording level, do so here as well. The default is 0dB. See Setting the recording level on page 28 to adjust it.
1
Load the CD(s) you want to record tracks from in to the CD changer.
You can use any of the three disc trays in the changer.
2
Load a CD-R or CD-RW into the CD-R tray.
If the disc isn't blank, make sure that there is enough space on the disc for what you want to record (see Switching the Display on page 16�18 to check this).
3
Press the CD SELECT button for the disc you want to record.
On the remote, use the three DISC buttons. The disc will begin playback from the first track.
7
Press CD =CD-R START (front panel only).
The recorder starts recording the section of the disc, and stops automatically when it's finished. � If the button is blinking, there�s not enough space on the disc for what you want to record. Press again to start recording anyway, or press 7 to cancel. � If you want to now finalize the disc, turn to page 30.
4
Use 4 1 and ¡¢ (CD changer side) to select the track you want to start from.
On the remote, use the number buttons to choose the track directly (or use 4 and ¢).
5
Press 6 (8 on the remote) at the point at which you want to start recording.
