jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
1-5. Replacement of Board
4. Insert the main board along the board guides with the board lever closed in the direction of arrow 2 shown in the figure. Then, connect the main board securely to the connector on the MB-932 board.
MB-932 board Board guides Main board
1-5-3. PS-607 Board
w Be sure to pull out the power plug of the unit from the wall outlet before initiating the replacement operation. 1. Remove the front panel. (Refer to Section 1-1.) 2. Remove the top plate. (Refer to Section 1-1.) 3. Disconnect the three harnesses from the connectors (CN1, CN2, and CN3) on the PS-607 board. 4. Remove the five screws. 5. Remove the PS-607 board.
A side
PSW 3x6 Harness Harness CN1
2 Board lever
PSW 3x6 Harness
PSW 3x6 CN2
5. Set the switch (S1) on the PS-607 board to ON. 6. Install the front panel.
CN3
PS-607 board
1-5-2. Connector Board
1. Remove the two screws, then remove the connector panel.
B 2.6x4 Connector panel
6. Secure a new PS-607 board to the PFV-L02 with the five screws. 7. Connect the harnesses to the PS-607 board. 8. Confirm the supply voltage. (Refer to the next page.) 9. Install the top plate. 10. Install the front panel.
2. Secure a new connector panel to the PFV-L02 with the two screws.
