|
Dla tego produktu nie napisano jeszcze recenzji!
TEMP
Pr ojecting The Pictur e Pr ojecting The Pictur e
Selecting An Input Signal
STANDBY/ON
POWER
LAMP
INPUT
MENU
1
Press the INPUT button.
As illustrated below, each time you press the INPUT button, the projector switches between its input signal ports. Select the signal you wish to project.
COMPUTER VIDEO S-VIDEO
INPUT button
COMPONENT VIDEO
2
Use the zoom ring to adjust the screen Focus ring size.
Zoom ring
3
Use the focus ring to focus the picture.
Adjusting The Projector's Elevator
CAUTION � To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet. You can use the elevator feet to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.
1 2
Press and hold in the elevator buttons. Raise or lower the projector to the desired height and then release the elevator buttons.
When you release the elevator buttons, the elevator feet will lock into position.
3
As necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand.
Elevator feet Elevator buttons
Using The Picture Shift Dials
When you want to finely adjust the picture position, use the picture shift dials. 1 Horizontal picture shift dial
7.5:2.5 to 2.5:7.5
10:0 to 0:10
2 Vertical picture shift dial NOTE � Generally, better quality of a picture is available when the lens shift is set to the center. � Do not attach anything other than specified options (such as an optional conversion lens) to the screw thread. For details, please ask your dealer.
4
|
