VESTAX PMC-05PROSL
Instrukcja Obsługi

@6 MIX VOLUME

@9 LEVEL/PLAY VOLUME It is the volume which adjusts the master output It is the volume which adjusts the effect level of level of SAMPLER / DELAY. When you want to SAMPLER / DELAY. In the SAMPLER mode, monitor the signal outputted from SAMPLER / the fader operates start/stop of a phrase of DELAY by headphone, please set this volume sampling. If volume is raised, it will start minimum. playback with the level according to the scale of @7EFFECT CUE SWITCH the volume, and if it is set at minimum, playback It is the switch for monitor sound of SAMPLER / will stop. DELAY by headphone. When the switch is #0 CURVE SWITCH pushed, MONITOR SELECT switch is changed to It is the switch which sets up the volume curve a MASTER/EFFECT CUE sides, you can monitor property of LEVEL/PLAY volume. At the time of of the signal outputted from SAMPLER / DELAY. the "C" side, level of sound increase rapidly. And When a switch is on, EFFECT CUE indicator lights at the "A" side, the level increase loosely. It is up. convenient if you use properly in the right time of @8 EFFECT CUE INDICATOR DELAY mode and SAMPLER mode. It is the indicator which tells ON/OFF state of #1 TAP SWITCH EFFECT CUE switch. The light is up when a In the DELAY mode, switch works to set up EFFECT CUE switch is on. delay time. And the button blinks according to the set-up delay time. In the SAMPLER mode, it works as a switch for starting. During playback, the button lights up.

FRONT PANEL SECTION
MIC

32 34 33 35
MIN MAX

MIC IN

36

EFFECT LEVEL

#2 MIC input jack

#5 MIC LEVEL VOLUME It is the input jack for MIC. It is the volume which adjusts the level of the #3 MIC EFFECT SWITCH microphone connected to MIC input jack. It is the select switch which sends the signal of a #6 PHONES (headphone) jack MIC channel to built-in SAMPLER/ DELAY. If it It is a jack only for headphone. Please use the pushed, a signal will be sent to SAMPLER / stereo headphone over impedance 8ohms. DELAY, and MIC EFFECT SEND indicator will light up. #4 MIC EFFECT INDICATOR LED will light up when MIC EFFECT switch is pushed.

-8-