Tip If you made a mistake, press NO�CANCEL. The setting entered last will be cleared. Reenter it.
5
Set the timer to the hour and the minutes you want the music to go on. 1 Turn the jog dial to set the hour and press YES�ENTER. 2 Turn the jog dial to set the minutes and press YES�ENTER.
6 7
Set the timer to the hour and the minutes you want the music to go off (Do as step 5.). Turn the jog dial to set the volume you want, and press YES�ENTER. Press STANDBY. �TIMER PLAY� lights up; the player enters the standby mode. At the preset time, the power will go on and music will play. Then the power will go off at the preset time, and the player will enter the standby mode again.
Tips � To exit the standby mode, press STANDBY to make �TIMER PLAY� disappear from the display. � The preset settings remain until you reset them. � As long as the t indication appears in the display, the player is in timer mode.
8
To check/change the waking up timer settings Press TIMER, then press YES�ENTER. Each time you press YES�ENTER, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and re-enter it. To use the player before a timer playback starts If you turn on the player, you can use it as usual (in case of the radio, if you listen to the station which is different from the one you tuned in step 1 on page 48, you will hear that station at the preset time). Turn off the player before the preset time. To stop play Turn off the power.
