CHOOSING A POWER SUPPLY
This radio can be operated using:4 Alkaline UM-1(D size) batteries AC power (230V/50Hz)
INSTALLING BATTERIES
(1) Position the radio face down. (2) Press the catch and pull out the cover of battery compartment. (3) Insert 4 UM-1(D size)batteries. (4) Replace the battery cover.
BATTERY REPLACEMENT
The battery indicator will display the battery level for approximately 7 seconds after radio is switched on. The battery indicator will show when the battery in full power level. ,the batteries when Display battery indicator shows
should be replaced. After removing the batteries, you have approximately 3 minutes to replace the batteries after which clock and memory information will be lost.
USING THE AC LINE-IN
Before plug the AC cord into Ac socket, make sure the AC voltage is 230V AC/50Hz. The AC cord should be disconnected from the mains supply when not in use
SETTING THE CLOCK
The clock will start running when the batteries are installed or AC power is plugged in.The display will show 0:00 and real time symbol ' '.
