INFINITY PRELUDE MTS CENTER
Instrukcja Serwisowa

Prelude MTS Center
EXPLODED VIEW
Terminal Cup 335369-001 Stand 335844-001 Screws (4) #6-32 x 1.5" PPH BLK 900301-024 Binding Post (Black) 335358-001 Binding Post (Red) 335358-002

Prelude Center (Not for Sale) Screws (2) #10-32 x .875" PPH BLK 900401-014

Knock-out Seal (4) 330068-001

Screws (8) #8-32 x ¹��" FPH BLK 901901-008

Front Baffle Gasket 335356 -002

Woofers (2) 335337-001

Network (2) 335241-001 Screws (4) #8-18 x ¹��" FPH BLK 908801-008 Grille retainer (8) 333249-003 Screws (4) PPH BLK #4-40 x ¹��" 905501-008 Tweeter 335225-001 Screws (4) #8-32 x ¹��" PPH BLK 900201-008 Mid-Range Cup 335226-002 Mid-Range Mid-Range 335224-001 Cup Gasket 335705-001 Network (2) 335241-001

End Cap Gasket (2) 335354-001 End Cap (2) 335044-001

Screws (8) #8-32 x ¹��" PPH BLK 900201-008

Screws (8) #¹�� -20 x 1.5" PPH BLK 908701-024 Front Baffle 335236-001

Grille 335230-002

To Service the Prelude MTS Center 1) Lay the loudspeaker down on a padded, level surface; remove the grille. 2) Extract all (8) rubber grille retainers; this can be accomplished by carefully pulling them out of their cavities with long-nosed pliers or similar tool. 3) Remove the (8) Phillips screws that are now exposed. 4) Carefully lift the fully loaded baffle off the cabinet. 5) To service the binding posts or terminal cup, remove the (4) Phillips screws that hold the cup to the rear cabinet. NOTE: Removal of this cup alone only allows access to the binding posts or terminal cup.

Infinity Systems, Inc. 250 Crossways Park Dr., Woodbury, New York 11797

11/01

Prelude MTS Center