USING THE DIGITAL TUNER (sold separately) TO WATCH DTV
1
TV
TV/ CBL VCR DVD DTV /SAT /LD
Set the SYSTEM MODE to ON. (Refer to page 66.)
� � Monitor input will be fixed to INPUT 1 and the picture from the input source selected by the receiver displayed. To watch TV, switch the receiver input to where the monitor�s TV OUTPUT signal connects. Channels can be selected using the monitor�s remote control.
POWER
TV
ON/OFF
DTV
�
4
INPUT
1
SPLIT
2
SEARCH
3
SELECT
2
SUB CH
DISPLAY
Watching DTV
1 Switch the receiver to where the digital tuner�s signal connect. 2 Set the mode switch to TV/DTV on the monitor�s remote control. 3 Press the DTV button on the monitor�s remote control.
� � Switching the monitor to DTV mode makes it possible to view a high-quality 1080i picture. Each time the DTV button is pressed, the operating mode will switch between DTV and TV mode. To change the input source, first switch to TV mode and then use the receiver to switch the input source.
SCREEN
MODE
ANT
FREEZE
DTV
AUDIO
1 4 7
2 5 8 0
¢
3 6 9
ENTER
CH
CH
RETURN
CH
MUTING
VOL
4
EDIT/
LEARN
TV/SAT/DVD
MENU
DTV/DVD TOP
MENU
SOURCE
POWER
DTV/SAT
4 Use the monitor�s remote control to select the channel. 5 Use the receiver to adjust the volume or select surround settings.
5 2
SET/ ENTER
GUIDE
3
DTV/(SAT)
INFO
VCR REC
8
1
POWER
�
FAVORITE CH
7
INPUT
3
VOL
¡
VOL
RECEIVER
PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT
�
OTHERS
NOTES: � When SYSTEM MODE is turned ON and the system is connected to a non-Dolby Digital receiver, no DTV audio output will be produced, and SYSTEM MODE should accordingly be turned OFF at such times. � Turning SYSTEM MODE ON will cause all monitor input to be input from INPUT 1, and SYSTEM MODE should accordingly be turned OFF when connected to RGB input.