ART PRO MPA
Podręcznik Użytkownika

APPLICATIONS
Microphone Preamp The main application of the PRO MPA is a microphone preamplifier. Plug any microphone directly into either input and set the input and output controls to provide an appropriate level into the next stage of your system. DI (Direct Input) The PRO MPA is ideal for use as a DI box. Plug the instrument into either input and use the XLR or 1/4 (or both) outputs to connect to your recorder, board or PA system. Experiment with different Input Level settings for different textures. Mastering (2-mix processing) Because of its low noise and excellent tonal qualities, the PRO MPA is ideal for running mixes through before recording to DAT or cassette. Used as a mastering device, the PRO MPA is capable of adding warmth and, if set properly, gentle tube compression to the incoming signal. Low noise and variable Input and Output level controls make the PRO MPA ideal for level matching material in post production situations. Special Effects For industrial, metal, or just �flavor� textures, experiment with the PRO MPA. Cascading the channels can produce overdrive and tube distortion that can add interesting textures when blended with vocals and different instruments. Placing signals purposely out of phase can yield interesting results. No harm will come to the PRO MPA with this type of experimentation. However, be sure to have output and monitoring levels turned DOWN before �testing� the sound. When running one channel into another (cascading), you have the potential for upwards to 120 to 140dB of gain.

WARRANTY AND SERVICE INFORMATION
Limited Warranty Warranty service for this unit will be provided by Applied Research and Technology, Inc. in accordance with the following warranty statement. Applied Research and Technology, Inc. (A R T) warrants to the original purchaser that this product is free from defects in workmanship and materials for a period of five years from the date of purchase. A R T will, without charge, repair or replace, at its option, defective product or component parts upon prepaid delivery to the factory service department or authorized service center, accompanied by proof of purchase date in the form of a valid sales receipt. EXCLUSIONS: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. This warranty is void if the serial number is altered, defaced or removed. A R T reserves the right to make changes in design and make additions or improvements upon this product without any obligation to install the same on products previously manufactured. A R T should not be liable for any consequential damages, including without limitation damages resulting from the loss of use. Some states do not allow limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights and you may also have other rights which vary from state to state. For units purchased outside the United States, service will be provided by an authorized distributor of Applied Research and Technology, Inc. products.

SERVICE
The following information is provided in the unlikely event that your unit requires service. Use this procedure to return units in the United States only. For service outside the United States, please contact your authorized A R T distributor.

10

11