10 The Initial Setup Menu
DTS Out
� Default setting: Off � Audio DRC is not effective when listening to a disc via the digital output when Dolby Digital Out is set to Dolby Digital. In this case adjust the dynamic range from your AV amplifier/receiver.
See page 29 for more on this setting.
� If you set to On with a non-DTS compatible amplifier, noise will be output when you play a DTS disc. � When set to On, there is no analog audio output when playing a DTS DVD-Video disc. � When playing a DTS audio CD (even when DTS Out is Off), noise is output from the analog outputs. Do not play this through your amplifier and speakers. � When playing a DTS audio CD, make sure that Stereo is selected using the AUDIO button. See page 50.
Language settings
OSD Language
� Default Setting: English
96kHz PCM Out
� Default setting: 96kHz = 48kHz
You can choose to display all the OSDs of this recorder in either English or French.
See page 29 for more on this setting.
MPEG Out
� Default setting: MPEG = PCM
Audio Language
� Default Setting: English
See page 29 for more on this setting.
Audio DRC
� Default setting: Off
This setting is your preferred audio language for DVD discs. If the language you specify here is recorded on a disc, the recorder automatically plays the disc in that language (although this depends on the Auto Language setting�see page 83). When watching Dolby Digital DVDs at low volume, it�s easy to lose low level sounds completely�including some of the dialog. Switching on Audio DRC (Dynamic Range Control) can help by bringing up the low level sounds, while controlling high level peaks. The Off setting leaves the original dynamics intact; Max �squashes� the dynamics the most. Exactly how much difference you can hear between the settings will depend on the material. Choose Other if you want to specify a language other than English or French (see page 84).
You can switch between the languages recorded on a DVD disc any time during playback using the AUDIO button. (This does not affect this setting.)
