PANASONIC PT52DL10
Instrukcja Obsługi

Installation

Analog RGB signals that can be input
The table below lists the different types of analog RGB signals that can be input. If a signal which differs greatly from any of the types listed below is input, the picture image may not be displayed correctly, or black background may displayed.

Display mode name VGA400 VGA480

No. of dots (H � V) 640 � 400 640 � 400 640 � 480 640 � 480 640 � 480 640 � 480 640 � 480 800 � 600 800 � 600 800 � 600 800 � 600 800 � 600 800 � 600 1024 � 768 1024 � 768 1024 � 768 832 � 624

Horizontal scanning frequency (kHz) 24.8 31.5 31.5 35.0 37.9 37.5 43.3 32.1 35.2 37.9 48.1 46.9 53.7 48.4 56.5 60.0 49.7

Vertical scanning frequency (Hz) 56.4 70.1 59.9 66.7 72.8 75.0 85.0 51.0 56.3 60.3 72.1 75.0 85.1 60.0 70.1 75.0 74.6

SVGA

XGA

MAC16

Note: The number of dots for this set is 800 � 600 for NORMAL display. Number of dots other than 800 � 600 in the above data, will be converted to 800 � 600 (with the exception of MAC 16, which will be displayed in 832 � 624 dots).

15