3. Adjust the mirror adjusting lever A position to minimize color unevenness on the screen by shifting the lever in arrow directions. 4. Tighten the 1 screw.
8.5.3.3.
R Reflector Adjustment
1. Turn on the power and display 100 % white pattern on the screen. 2. Loosen the 1 screw fixing the mirror adjusting lever B just until the lever can be shifted. 3. Adjust the mirror adjusting lever B position to minimize color unevenness on the screen by shifting the lever in arrow directions. 4. Tighten the 1 screw.
8.5.3.4.
B Reflector Adjustment
1. Turn on the power and display 100 % white pattern on the screen. 2. Loosen the 1 screw fixing the mirror adjusting lever C just until the lever can be shifted. 3. Adjust the mirror adjusting lever C position to minimize color unevenness on the screen by shifting the lever in arrow directions. 4. Tighten the 1 screw.
8.6.
8.6.1.
Software for Adjustment
Outline
· This projector needs computer-aided adjustments. · After the software adjustments, this projector must be turned off and on again to memorize the settings. · Connect the cable between the projector and a PC as shown below. · Updating the software will change the version number.
8.6.2.
Note:
Operating Procedure
1. Run software program by the keyboard entry. · Use the software program as below. Adjustment Tool [PT-F200, PX8x0 Series] 2. The first menu is Port and Model selection menu. 3. Adjust the projector by selecting the necessary item from the menu in each stage.
8.6.3.
Port and Model Selection Menu
Select the applying item with the list box and click "Data" or "Adjustment".
