PANASONIC PT-LB10NT
Instrukcja Obsługi

CONTRAST
This adjusts the contrast of the picture. (Adjust the �BRIGHT� setting first if required before adjusting the �CONTRAST� setting.) The picture is bright: I button The picture is dark: H button

White balance R/G/B (W-BAL R/G/B)
(RGB only) This is used to adjust the white areas of the picture if they appear colourised. To make the selected color lighter: I button To make the selected color stronger: H button

BRIGHT
This adjusts the darker areas (black areas) in the picture. Black areas are too light: I button Dark areas are too solid: H button

AI
ON The lamp is controlled according to the input signals to project images with the best quality. OFF �AI� is disabled. NOTE: B �AI� is disabled when �LAMP POWER� is set to �LOW�. (Refer to page 45.)

COLOR
(S-VIDEO/VIDEO/YPBPR only) The color is too deep: I button The color is too pale: H button

TINT
(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. The flesh tones are greenish: I button The flesh tones are reddish: H button

SHARPNESS
To soften the picture details: I button To sharpen the picture details: H button

COLOR TEMP.
COLOR TEMP. STANDARD
[

HIGH
[

LOW
This is used to adjust the white areas of the picture if they appear bluish or reddish.

38-ENGLISH