Turning on the power
Before turning on the power 1, Ensure that all peripheral devices are connected properly. 2, Remove the lens cover.
POWER
&
# Power cord
Press the input select button to select the input signal.
Input select buttons Changing signals
VIDEO
RGB
INPUT
$
RGB
VIDEO NETWORK
S-VIDEO RGB
VIDEO S-VIDEO
RGB NETWORK
VIDEO
AUTO SETUP
&
MENU ENTER
BA picture will be projected in accordance with the selected input signal. BWhen a YPBPR signal is being input, �YPBPR� will be displayed instead of �RGB�. B�NETWORK� is for PT-LB10NTU only.
)
FREEZE SHUTTER STD VOLUME INDEX WINDOW D.ZOOM
(
Power indicator
*
PROJECTOR
' BWhile pressing the adjuster buttons,
Adjusting the angle
Lens cover
'
#
Connect the accessory power cord to the AC IN socket.
BThe power indicator on the projector will illuminate red.
adjust the forward/back angle of tilt of the projector. Adjust so that the projector is as vertical to the screen as possible.
( Press the AUTO SETUP button to initiate
BThe tilt of the projector and the input signal will be detected and keystone distortion and the position of the image will be corrected. (Refer to page 28 for details.)
automatic positioning.
$ BThe power indicator on the projector will flash green. After a short
Press the POWER button.
period, the indicator will illuminate green, and a picture will be projected.
AUTO SETUP
% Turn onplay function of aof all such as a DVD player. the power connected devices. BStart the device
NOTE: B If the power cord was disconnected during projection when the projector was used the last time, projection will start after the mains lead is connected (when �POWER MEMORY� in the �OPTION2� menu is set to �ON�). Refer to page 46 for details. B A tinkling sound may be heard when the lamp unit is turned on, but this is not a sign of a malfunction.
) Adjusting the size
BTurn the zoom ring to adjust the size of the projected image.
* Adjusting the focus the focus of the projected image. BTurn the focus ring to adjust
ENGLISH-25
24-ENGLISH
Basic Operation
Follow the procedure below when you set the projector up first, and when you change the setup place.
