jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
5. Unscrew the 4 screws and remove the power block (PModule and B/Q-Module).
6. Unscrew the 3 screws and remove the power box.
7.8.
Removal of G-P.C.Board
1. Remove the A-P.C.Board block according to the steps 1 through 6 in the section 7.3. "Removal of A-P.C.Board". 2. Disconnect the flexible cable between the G-P.C.Board and A-P.C.Board. 3. Unscrew the 2 screws and remove the G-P.C.Board. 7. While pressing to shut each hook of the 4 resinous stands, remove the B/Q-Module.
7.9.
Removal of B/Q-Module
1. Remove the lamp unit according to the section 7.11. "Removal of Lamp Unit". 2. Remove the A-P.C.Board block according to the steps 1 through 6 in the section 7.3. "Removal of A-P.C.Board". 3. Unscrew the 2 screws and remove the lamp unit terminal. 4. Unscrew the 2 screws and remove the exhaust fan .
7.10. Removal of P-Module
1. Remove the power block and power box according to the steps 1 through 6 in the section 7.9. "Removal of B/Q Module". 2. Unscrew the 1 screw. 3. While pressing to shut each hook of the 3 resinous stands, remove the P-Module.