DVD/Video CD/CD
Play fails to start even when PLAY is pressed... Play starts but then stops immediately... Picture is distorted during rapid advance or rapid reverse... No Forward/Reverse search play... Play does not start even when title is selected... Audio soundtrack and/or subtitle language is not the one selected at the initial settings... No subtitles...
Correction
� This unit cannot play discs other than DVDs, Video CDs and CDs. � The disc may be dirty and require cleaning. � Be sure disc is installed with label side up. � The picture will be somewhat distorted at times: this is normal. � Some discs may have sections which prohibit Forward/Reverse search. (P. 17) � Confirm the �DVD LOCK� setting. (P. 40) � If the audio soundtrack and/or subtitle language selected at DVD initial settings does not exist on the disc, it will not be accessible. � Subtitles appear only when available on disc. � Select �ON� at the �subtitle language� section (P. 32) to display subtitles. � Alternative language cannot be selected with discs which do not contain more than one language. � For some discs, alternative language cannot be selected with the AUDIO or SUB TITLE button. Try selecting it from the DVD menu if available. � This function is dependent on software availability. Even if disc has multiple angles, they may be recorded for specific scenes only (ANGLE Indicator on unit lights up). (P. 33)
Alternative audio soundtrack (or subtitle) language cannot be selected...
Angle cannot be changed...
Miscellaneous
The disc cannot be removed...
Correction
� First, unplug unit. Then, prepare a rigid wire (e.g. an extended paper clip, etc.) and, applying moderate force, insert it straight into the hole at the base of the tray. The tray will eject a little. Now, pull the tray all the way out and remove the disc. (P. 7)
Warning and Instruction Displays
These displays will alert you of a missed operation or provide further instructions.
OSD
NO CH FOUND PLEASE CHECK ANTENNA CABLE CONNECTION THEN PRESS CH UP KEY AGAIN PLEASE SET CLOCK BEFORE TIMER SETTING PLEASE CHECK THE DISC, AND FOR STAINS OR SCRATCHES ON DISC
Caution
� If no active channels are found for CHANNEL MEMORY... � If you attempt to set or review a set the On-Timer and the Clock is not set... � If you press PLAY, or the unit reads data from a stained or scratched disc in DVD mode. Also, if the type of disc is other than DVD, Video CD or CD...
