PANASONIC PVC2061
Instrukcja Serwisowa

Before applying DC Power Supply, be sure to cut the Motor Leads with a cutter, etc. Otherwise, the Loading Motor Drive IC (IC2501) may be damaged. When reconnecting the Motor Leads, solder at below / 320 °C for less than 3 seconds.
Fig. 6-2

When loading without a cassette, push Portion "a" on the Holder Unit of Cassette Up Ass�y so that the Lever clear the First Tab and Second Tab. Fig. 6-3

5.1.10. HOW TO REMOVE A JAMMED TAPE
CAUTION:

Wiper Arm Unit may be damaged or its spring may be out of place when the jammed tape is removed by force.
Remove a jammed tape as follows: 5.1.10.1. Manual Method
16