PANASONIC PVDV201
Instrukcja Obsługi

Special Features
Auto Focus
The Palmcorder automatically adjusts the focus over the entire zoom range.

Manual Focus
Use Manual Focus (MF) when recording ...
� a subject through glass. � a scene where the subject is far from the Palmcorder and there are objects in the foreground. � a subject with distinct horizontal stripes. � a subject not centered in the Viewfinder. � subjects with shiny surfaces. � an obliquely angled subject. � a bright, flat subject such as a white wall. � in low light situations. � a scene with fast motions, like a golf swing. Re-focusing may be required � when your Palmcorder is aimed at a new scene.

1

2Press 3 4 5

Set POWER to CAMERA. � The POWER lamp lights red. � Be sure POWER is fully turned to CAMERA position. M.FOCUS DIAL so that �MF�

(Manual Focus) appears in the EVF or the LCD monitor. Press and hold POWER ZOOM �T� side (Telephoto) until the lens is at maximum zoom in.

2, 4M.FOCUS 3, 5POWER
DIAL

ZOOM Switch

Press POWER ZOOM to �W� or �T� as desired. � The subject will remain in focus over the entire zooming range. � It may be necessary to back away from the subject to focus the image properly. Note

Turn M.FOCUS DIAL until the picture is in focus. � It may be necessary to back away from the subject to focus the image properly.

1POWER Switch
Macro Focus (for close-ups) Backlight

� DISPLAY must be set to on for MF, AE, W.BALANCE, or BACK LIGHT to be displayed on the LCD or EVF.

Press the �W� side of POWER ZOOM to the maximum wide angle position. Auto Focus will function with the subject as close as 1 inch (25 mm) in front of the lens.

Special Special Features Features

Use when recording a subject that is darker than the surrounding scene, in a shadowed area, or when the light source is in back of your subject. BACK LIGHT Button Press BACK LIGHT in Record mode to activate the Backlight feature. The Indicator � � will appear in the EVF or LCD monitor. Press BACK LIGHT again to cancel the Backlight feature. Note � The Indicator � � will not appear in the EVF or LCD monitor when OFF is selected in the DISPLAY menu.

EVF or LCD monitor indication.

47