Advanced Settings
Auto Focus
The Palmcorder automatically adjusts the focus over the entire zoom range.
Manual Focus
Use Manual Focus (MF) when recording ... � a subject through glass. � a scene where the subject is far from the Palmcorder and there are objects in the foreground. � a subject with distinct horizontal stripes. � a subject not centered in the Viewfinder. � subjects with shiny surfaces. � an obliquely angled subject. � a bright, flat subject such as a white wall. � in low light situations. � a scene with fast motions, like a golf swing. Re-focusing may be required � when your Palmcorder is aimed at a new scene.
1 2 3 4 5 6
Set POWER to CAMERA. Hold down AUTO/MANUAL for more than 0.7 seconds so that the �MNL� indication appears in the EVF or the LCD monitor. Press FOCUS so that the �MF� (Manual Focus) indication appears in the EVF or the LCD monitor. Press and hold POWER ZOOM, �T� side (Telephoto), until the lens is at maximum zoom in. Turn M.FOCUS DIAL until the picture is in focus. � It may be necessary to back away from the subject to focus the image properly. Press POWER ZOOM to �W� or �T� as desired. � The subject will remain in focus over the entire zooming range. � It may be necessary to back away from the subject to focus the image properly.
4, 6POWER
ZOOM
5M.FOCUS
DIAL
1POWER 2AUTO/
MANUAL
Camera
Note
� DISPLAY must be set to on for MF, AE, W.BALANCE, or BACK LIGHT to be displayed on the LCD or EVF.
3FOCUS
Macro Focus (for close-ups)
Press the �W� side of POWER ZOOM to the maximum wide angle position. Auto Focus will function with the subject as close as 25 mm (1 inch) in front of the lens.
