The one-touch free-style grip belt
ª To use as a hand strap If you use the grip belt as a hand strap, then you can carry or handle this Camcorder more easily. 1 Open the lock cover 1 by pinching the projections 2 on both sides. Press the lock button 3 to remove the grip belt.
ª To use as a grip belt Adjust the belt length so it fits your hand. 1 Adjust the belt length and the pad position.
2 2 13
1 3 �When removing the grip belt, tightly hold the
Camcorder with both hands. �After removing the grip belt, restore the lock cover to the original position. 2 Adjust the belt length.
1 Flip the belt. 2 Adjust the length. 3 Fix the belt.
Using the LCD monitor
You can record the image while viewing it on the LCD monitor. 1 Put a finger on the LCD monitor release and pull the LCD monitor out in the direction of the arrow.
1
2
13
1 Flip the belt. 2 Slide 1 in the direction indicated by the arrow. 3 Fix the belt. 3 Put your hand through the strap.
�The viewfinder is now deactivated. �It can open up to 90o. 2 Adjust the angle of the LCD monitor according to your preference.
�Use the Magic Wire Remote Control with Narration Mic for more convenience. �Hold the Camcorder without covering the microphones or the sensors with your hands. ª To restore the strap to the grip belt �When returning the grip belt to the grip belt attachment, press the lock cover 1 and check if the grip belt is securely locked.
1 180o
2 90o
�It can rotate up to 180o 1 towards the lens or 90o 2 towards the viewfinder. �The brightness and color level of the LCD monitor can be adjusted from the menu. �If it is forcibly opened or rotated, the Camcorder may be damaged or fail. �Check that the card slot cover is closed. �When the LCD monitor is rotated by 180o towards the lens (when recording yourself), the LCD monitor and the viewfinder will be simultaneously activated.
