Playback Mode
Playing Back a Tape
The recorded scene can be played back immediately after the recording. 1 Set the [OFF/ON] Switch (46) to [ON]. �The [POWER] Lamp (47) lights up.
F F
ª Adjusting the Sound Volume
To adjust the volume, push the [W/T] Lever (40) to display the [VOLUME] Indication. Push the [W/T] Lever towards [T] to increase the volume or push the [W/T] Lever towards [W] to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.
VOL/JOG
ON
O
(46)
POWER
W
(40)
T
(47)
2 Set the Mode Dial (43) to Tape Playback
Mode.
SD
3 Press the [6] Button (16) to rewind the
tape.
STILL
(16)
s
ENTER FADE
�Rewind the tape to the point where you want to start playback. �When the tape reaches the beginning, rewinding stops automatically. 4 Press the [1] Button (14) to start playback. �The [!] Indication appears.
(14)
STILL
s
ENTER FADE
i
�If a cassette recorded with a copyright protection signal is played back, the picture is distorted by mosaic-like patterns. To Stop Playback Press the [�] Button (15).
STILL
(15)
s
ENTER FADE
i
PC
(43)
To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.
�The sound volume cannot be adjusted using the Remote Controller in Playback Zoom Mode. (-39-)
i
�For other notes concerning this item, see -67-.
Finding a Scene You Want to Play Back
ª Cue/Review Playback
STILL ENTER FADE
s
i
(16)
(13)
If the [5] Button (13) or [6] Button (16) is pressed during Playback, it turns to Cue Playback A or Review Playback B.
A
B
�If the Button is held continuously, it turns to Cue Playback or Review Playback until you release it.
