Audio dubbing
You can add music or narration to the recorded cassette. �Set to Tape Playback Mode. 1 Insert an external microphone securely into the [MIC] terminal as far as it will go.
MIC
ª Before recording with audio dubbing �Set to Tape Recording Mode. �When you want to preserve the original sound taken during recording, set [SETUP] >> [AUDIO REC] >> [12bit] to take pictures. (When set [16bit], the sounds taken during recording are erased after recording with audio dubbing.) �Set [BASIC] >> [REC SPEED] >> [SP] to take pictures. ª To play back the sound recorded with
audio dubbing 2 Find a scene that you want to add sound to,
and press the [;] button on the remote control.
V
/REW
PLAY
FF/W
;
W
VOL
STILL ADV PAUSE STILL ADV
You can switch between the sound recorded with audio dubbing and the original sound. Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX]. [ST1]: It only plays back the original sound. [ST2]: It only plays back the sound added by audio dubbing. [MIX]: It simultaneously plays back the original sound and the sound added with audio dubbing. ª To dub audio while listening to a
STOP
3 Press the [A.DUB] button on the remote
control to make audio dubbing ready.
ZOOM
pre-recorded sound
�When a microphone is used for audio dubbing, use headphones to listen to the pre-recorded sound while dubbing the audio. (When using headphones, set [AV JACK] >> [OUT/�].) When you set [SETUP] >> [12bit AUDIO] >> [ST2], you can check the pre-recorded sound.
T
Â¥REC
V
A.DUB ;
A.DUB FF/W
/REW
PLAY
W
VOL
STILL ADV PAUSE STILL ADV
4 Press the [;] button on the remote control
to start audio dubbing.
V
/REW
PLAY
FF/W
W
VOL
A.DUB ¥
STILL ADV PAUSE STILL ADV
STOP
�Talk into the microphone.
5 Press the [;] button on the remote control
to stop audio dubbing.
V
/REW
PLAY
FF/W
W
STILL ADV PAUSE STILL ADV VOL
STOP
�If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.
