PYE PY90VG
Instrukcja Serwisowa

HOW TO INITIALIZE THE DVD RECORDER & VCR
To put the program back at the factory-default, initialize the DVD recorder & VCR as the following procedure.

< DVD Section >
1. Turn the DVD recorder on. 2. Confirm that no disc is loaded or that the disc tray is open. To put the DVD recorder into the Version display mode, press [DVD], [CM SKIP], [1], [2], and [3] buttons on the remote control in that order. Fig. a appears on the screen.
*1: "*******" differs depending on the models. *2: Firmware Version differs depending on the models, and this indication is one example.

F/W VERSION DISP
MODEL NAME : FE VERSION : BE VERSION : TT VERSION : LD ADJUSTMENT : DISC ADJUSTMENT :

*******
R30_005_082 R3F10210S1E T30015FSU OK OK

DEFAULT SETTING : ENTER EXIT : RETURN

Fig. a Version Display Mode Screen

3. Press [OK] button, then the DVD recorder starts initializing. When the initializing is completed, the DVD recorder exits the Version display mode and turns off the power automatically. * To move into the Normal mode from the Version display mode, press [RETURN] button on the remote control instead of [OK] button. When [STANDBY-ON] button is pressed before [OK] button is pressed, the DVD recorder exits the Version display mode, then the power turns off.

*

1-8-1

E9A80INT