HUSQVARNA R150SH
Instrukcja Obsługi

ENGLAND DESCRIPTION
1 2 3 4 5 6 Upper handles Fuel-enrichment pump Fastening knobs for upper handles Grass catcher Oil filler cap Oil drain plug 7 8 9 10 11 12 13 Deck Adjusting levers for cutting height Spark plug Fuel cap Engine start-grip Rear deflector Throttle lever 14 15 16 17 18 Engine stop lever Reduction gear Console Clutch lever Handle advance speed

ASSEMBLY OF GRASS CATCHER

ASSEMBLY

Self-Propelled Lawnmower. Remove the bail arms, attach cables as shown and re-fit the bail arms.

ASSEMBLY MULCHING CAP INSERTION

3 Speed Self-Propelled Lawnmower. Remove the bail arms, attach cables as shown and re-fit the bail arms.

To cut the grass with the mulching system (no grass collection), lift the rear deflector panel and insert the cap by fixing it with the spring as shown in the figure.

ADJUSTMENT OF HANDLES HEIGHT

ADJUSTMENT OF CUTTING HEIGHT

SAFETY PRECAUTIONS
� Always operate with the deflector or grasscatcher in the correct position. � Always stop the engine before removing the grasscatcher or adjusting the height of cut. � Never place your hands or feet underneath the deck or into the rear grass discharge chute while the engine is running. Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been missed. Never lift the rear of the mower while starting the engine or during normal operation.

Never place your hands or feet underneath the deck or into the rear discharge chute while the engine is running.

OPERATION (starts at page 38)
ENGINE ADJUSTMENTS
Refer to the engine manufacturer's maintenance manual. CAUTION:- 0.6l Oil must be added to the engine before use.

STARTING THE ENGINE
Once the machine has been set up properly, start the engine as follows: a) Engines with choke system: when the engine is cold, position the accelerator lever (13) on START b)Operate the engine stop lever (14) to prepare the engine for start, keep lever pressed against handle while starting and using the machine - it operates the engine brake. c) Engines with primer system: Press the fuel-enrichment pump (2) located on the carburettor 3 or 4 times position the accelerator lever (13) on MAX. For further information and explanations, read carefully the user instruction manual of the engine.

d) Start engine. MANUAL STARTING: (While holding the engine stop lever (14)). �Hold the engine start-grip (11) and pull the starter rope gently until you feel the resistance caused by compression. Return the starter rope slowly then pull the handle firmly towards you to its full extent. Keep the engine stop lever (14) depressed during machine operation. When the lever is released, the engine stops.

MOWING
To cut the grass, push the lawn mower manually or insert the automatic advance gear. How to insert automatic advance: Lift up the clutch handle (17) and keep it pressed in position. CAUTION: Engage the gear only when the engine is running. How to disengage advance: Release the clutch handle.

7