Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 9 (kliknij aby zobaczyć)
R-353M O/M & C/B
05/02/2000
08:50
Page 7
BEFORE OPERATION
Plug in the oven. 1. The oven display will flash: 2. Press the STOP/CLEAR key: 1.
STIR TURN KG�LB PCS MICRO COOK
2.
STOP
CLEAR
x1
3. The display will show:
3.
STIR TURN KG�LB PCS MICRO COOK
SETTING THE CLOCK
There are two setting modes: 12 hour clock and 24 hour clock: 1. To set the 12 hour clock, press the AUTOSTART/CLOCK key once, will appear in the display. 2. To set the 24 hour clock, press the AUTOSTART /CLOCK key twice, will appear in the display. To set the time of day: Example: To set the 24 hour clock to 23:35: 1. Select the 24-hour clock. 2. To enter the hours press the 10 MIN key twice. 3. Then the 1 MIN key 3 times. 4. To change from hours to minutes press the AUTOSTART /CLOCK key once.
AUTO START CLOCK AUTO START CLOCK AUTO START CLOCK
x1
x2
AUTO START CLOCK
10min.
x2
1min.
x3
x2
x1
5. To enter the minutes press the 10 MIN key 3 times.
6. Then press the 1 MIN key 5 times.
7. To start the clock press the AUTOSTART/CLOCK key once. Check the display:
AUTO START CLOCK
10min.
x3
1min.
x5
x1
STIR TURN KG�LB PCS MICRO COOK
NOTE: 1. If you press any of the time keys too many times, continue to press until your desired time appears. 2. Press the STOP/CLEAR key if you make a mistake during programming. 3. If the electrical power supply to your microwave oven is interrupted, the display will intermittently show: after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased. 4. When you want to reset the time of day, follow the above example again.
