HITACHI RASE14H
Instrukcja Serwisowa

HOW TO SET THE TIMER

1 month and day Time, Day, Month 2 3 Set current time with 4 Press the (TIME)
seconds. time, day, month) � To check the current time
AM PM
PM

TIME, DAY, with (TIME) the TIMER control button. button again. � The time indication will MONTH (current indication star ts lighting After you change the disappear automatically in 10 batteries; instead of flashing.
M D PM button twice.

setting, press the (TIME) Example: The current 1:30p.m. time is now complete. The setting of the current OFF TIMER

ON TIMER
OFF-Timer Press the (OFF-TIMER) Set turn-off time with Point signal window of remote controller toward the indoor unit, The (OFF) mark blinks TIMER control and press the (RESERVE) button. RESERVE on display. The (OFF) mark starts lighting instead of flashing and the (RESERVED)
AM
PM

1 2 3
CANCEL

Start Stop PM sign lights. A beep occurs and (TIMER) lamp lights on the indoor unit.
Example:The device will turn off at 11:00 p.m. You can set the device to turn off at

the present time.
The setting of turn-off time is now complete.

ON-Timer Set turn-on time with Point signal window of remote controller toward the indoor unit, Press the (ON-TIMER)

2 3 1
TIMER control and press the (RESERVE) button. Stop Start button. The (ON) mark blinks on
AM

device will turn on at The (ON) mark starts lighting instead of flashing and the (RESERVED) the display. designated times. sign lights. A beep occurs and (TIMER) lamp lights on the indoor unit.
Example: The device will turn on early so that the preset
AM

AM

temperature be almost reached at 7:00 a.m. The setting of the turn-on time is now complete.

� 10 �

4 Set turn-on time with 5 Point signal window of remote controller toward the indoor unit, ON/OFF-Timer 1 (OFF2 Set turn-off time 3 Press the (ONTIMER control and press the (RESERVE) button. with TIMER control TIMER) button so that the

Start Stop sign lights. A beep occurs and (TIMER) lamp lights on the indoor unit.
PM

The (ON) mark starts lighting instead of flashing and the (RESERVED) the button. (OFF) mark lights and (ON) mark blinks. Press the (RESERVE)

button.
PM PM

PM

� The device will turn on (off) and
For heating, the device will turn off at 10:30 p.m., � The switching occurs first at the d u n l y o a h p r s e t preset time that comes earlier.
AM
AM

PM

Example: off (on) at the designated times. temperature be almost reached at 7:00 a.m.; for

cooling and dehumidifying, it will simply turned on
AM

at 7:00 a.m. The settings of the turn on/off times

� The arrow mark appearing on the display indicates the sequence of switching operations. are now complete.

How to Cancel Reservation � The timer may be used in three ways: off-timer, on-timer and ON/OFF (OFF/ON)-timer. Set the

current time at first because it serves as a reference.

Point signal window of remote controller toward indoor unit, and press the (CANCEL) button. � As time settings are stored memory in remote controller, you only have to press the The (RESERVED) sign goes out with a beep and (TIMER) lamp turns off on the indoor unit. (RESERVE) button is order to use the same settings next time.

NOTE

You can set only one of the OFF-timer, ON-timer and ON/OFF-timer.
12 13 �