WHIRLPOOL RB270PXYB3
Instrukcja Obsługi

7. Use the Hour and Minute pads to set the desired stop time. Push the �up� (A) or �down� (V) pad(s) until the correct time shows in the display.

This example shows a desired stop time of 2:30. This provides a cook time of 30 minutes (the difference between the start and stop times). NOTE: lf you do not set a stop time, the colon will flash in the display and STOP and COOK will flash alternately to remind you to program a stop time or a cook time. (See page 21 for instructions on how to set delay start and stop automatically using Cook Time and Start Time.) 9. Push the Start/Enter pad. DELAY and BAKE will light up in the display to indicate that the oven is programmed to start at a later time. NOTE: The display will show �door� and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/roast. You can change the temperature or time settings any time after pushing the Start/Enter pad by repeating just Steps 3 through 7.

9. When the start time is reached, a one-second tone will sound and DELAY will go off. The display will show the set cook time. �Lo��, HEAT, TIMED and BAKE will light up in the display to show that the oven is heating. The display will count down the bakinq/roasting time in minutes. 10. When the bakfng�roasting time is completed, the oven will turn off automatically, beep four times and �End� will show in the display. You will also hear four 1-second tones every minute until you push the Off/Cancel pad. NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.
To cancel the MEALTIMER�
l

control

setting:

Push the Off/Cancel pad to return the display to the time of day.

24