Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
When CD, VIDEO 1~3 is selected as an input source
Select the digital or analog input connected as desired.
7
To compensate for edgy or shrill movie sound tracks.
4
� Each time this button is pressed, the corresponding input is selected as follows ; o(ptical) 1 c(oaxial) 1 c(oaxial) 2 A(nalog) � To listen to a DTS or Dolby Digital program source in the 2-CH downmix mode, in the stereo mode, the corresponding digital input should be selected. (For details, refer to �Downmixing into 2 front channels� on page 19.) Notes : � When the selected optical or coaxial digital input is not connected, the selected digital input display is flickering, meaning no sound. (Refer to �ENJOYING SURROUND SOUND� on page 15.) � The sound from the component connected to the selected digital input can be heard regardless of the selected input source.
� Then �C-EQ ON� is displayed. � Press it again to cancel, the �C-EQ OFF� is displayed. � When the 6 CH DIRECT is selected as an input source, the cinema EQ function does not work.
To mute the sound.
8
� �MUTE� will flicker. � To resume the previous sound level, press it again.
5
Operate the selected component for playback.
To listen with the headphones.
9
� When playing back the program sources with surround sound, refer to �ENJOYING SURROUND SOUND� on page 15.
Adjust the (overall) volume.
6
� Ensure that the SPEAKER button is set to off. � When listening to a DTS or Dolby Digital program source, if the headphones are plugged in and the SPEAKER button is set to off, it enters the 2-CH downmix mode automatically. (For details, refer to �Downmixing into 2 front channels�on page 19.)
