Disconnect the aerial cable from your TV, and connect it to the RF IN (FROM ANT.) terminal on the recorder. Using the coaxial cable (supplied), connect the RF OUT (TO TV) terminal to the TV. Connect the AV1(AUDIO/VIDEO)IN/OUT socket to a TV equipped with SCART input using the SCART cable. Connect the power plug of the recorder to a wall outlet.
Aerial cable (Not supplied)
Satellite receiver
If you use a satellite receiver, connect it to the AV2(SAT/ DECODER)IN/OUT socket.
1 2 4
Power cord To AV1 (AUDIO/VIDEO) IN/OUT TV Coaxial cable (supplied) To wall outlet To aerial input To SCART input SCART cable (not supplied)
3
Turning the power on
Press ON/STANDBY.
Turning the power off
Press ON/STANDBY. When the power is turned on, the ON/STANDBY indicator changes colour from red (standby mode) to green (operation). After a few seconds, a startup screen appears. The following icon will appear on the top right corner of the screen.
e.g.
Loading
ON/STANDBY button
ON/STANDBY button
When this icon disappears, the recorder is ready to operate. When the recorder is turned on for the first time, recorder automatically sets its own tuner and clock. See the next page.
