KENWOOD RD-HD5MD
Instrukcja Serwisowa

RD-HD5MD/HD7
DISASSEMBLY FOR REPAIR / ADJUSTMENT
DISASSEMBLY FOR REPAIR How to open the tray if it does not come out.
1. Turn the gear in the direction of the arrow using a bamboo stick and so on in the drawing through the hole on the loading chassis bottom. Note : Do not use a screw driver like a metallic instead of a bamboo stick. (There is a danger of damaging the gear.) 2. Pull out the tray frontward by hand when it comes just out.

ADJUSTMENT
No.
ITEM INPUT SETTINGS OUTPUT SETTINGS RECEIVER SETTINGS ALIGNMENT POINTS ALIGN FOR

FIG.

AUDIO SECTION :

SELECTOR : EXCEPT TUNER MODE

IDLE CURRENT <1> (RD-HD7 only)

Connect a DC voltmeter to CP901 or CP902 CP901 (Lch) CP902 (Rch)

Volume: Minimum

VR203 (Lch) VR204 (Rch)

8 mV

4