Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
3.
Pull the surface unit straight from the receptacle
away
4.
Llftoui the reflector bowl. See Cleaning Chart on page14 for cleaning instructions
Replacing
2.
Line up opening in the reflector bowl with the surface unit receptacle
3.
Hold the surface unit as level as possible with the terminal just started into the receptacle
4.
Push the surface unit terminal into the receptacle. When the terminal IS pushed into the receptacle as far as it will go, the surface unit will fit into the reflector bowl,
