WHIRLPOOL RF310BXYW2
Instrukcja Obsługi

Adjusting

the oven temperature

control

Oven temperature controls will gradually shift after years of use. So, even though your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven. If, after using the oven for a period of time, you are not satisfied with the temperature settings, you can change them by following these steps: 1. Turn the Oven Temperature Control Knob to the off position. Pull knob straight off and flip it over.

2. Loosen

the locking screws inside the control knob. Note the position of the notches.

Locking screws

TooHI /

3. To lower the temperature,

hold knob handle firmly and move the tooth a notch counterclockwise. Each notch equals about 5°F (2.5%).

4. To raise the temperature,

hold knob handle firmly and move the tooth a notch clockwise. Each notch equals about 5°F (2.5%). the locking screws and replace the control knob.

Notches

5. Tighten

Broiling
1. Position the rack properly before turning on the oven. Position rack so that the surface of the food is at least 3 inches (7.4 cm) away from the broil element. See �Broiling rack position chart� on page 14.
2. Put the broiler pan and food on the rack. 3. Close the door to the Broil Stop position

(open about 4 inches [lo.2 cm]). The door will stay open by itself.
4. Set the Oven Selector and Oven Tempera-

ture Control Knob to BROIL. The OVEN HEATING Indicator Light will come on. NOTE: Do not preheat oven when broiling.