Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 16 (kliknij aby zobaczyć)
Using the Self-Cleaning Cycle
The Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely.
Before You Start 11 Clean ihe shaded areas by hand. DONOT clean me fiberglassseal.
They do not get hot enough during the Self-Cleaning cycle for soil to burn away. Use hot water and detergent or a soapy steel wool pad on... l The inside of the door. The frame around the oven. l DO NOT move it or bend it. Poor cleaning and poor baking will result. 2. Remove the broiler pan and any pots and pans you may have stored in the oven. They can�t stand the heat.
3. Wipe
out any loose soil or crease. This will helD reduce smoke &ring the Self-Cleaning cycle.
4. If the oven has a rotisserie, make sure the motor socket cover Is 5. If you want the oven racks to remain shiny, remove from the oven and clean by hand. Ctherwise, put oven racks on second and fourth guides (guides are counted from bottom to top]. After racks are cleaned in the SelfCleaning cycle, they become slide. See chart on
CLEAN DOOR Turn on the vent hood or other kitchen vent during the Self-Cleaning cycle. This will help remove heat and odors that are normal during the CyCle. SPECIAL CAUTIONS: DO NOT use commercial oven cleaners in your oven. Damage the porcelain finish may occur. to DO NOT block the vent during the Self-Cleaning cycle. Air must move freely for best cleaning
DO NOT force the lock lever, you could bend or break it. The lever is designed to stay locked until the oven is cool enough to safely open. Walt until it moves freely. DO NOT use foil or other liners in the oven. During the Self-Cleaning cycle foil can burn or melt and damage the oven surface. 16
