WHIRLPOOL RF395PXPW0
Instrukcja Obsługi

Using the Self-Cleaning Cycle
The self-cleaning cycle uses very hlgh heat to burn away sot1 Before you start. make sure you understand exactly how to use the cycle safely.

Before You Start 1. Clean me shaded

areas by hand. They do not get hot enough during the Self-Cleaning cycle for soil to burn away. Use hot water and detergent or soapy steel-wool pad on... the frame around the oven. l the Inside of the door, especially l the port outside the oven seal.

DO NOT clean thei Hberglass seal. DO NOT move it or bend i-t. Poor cleaning and poor baklng will result. 2. Remove the broiler pan and any pots or pans you may hove stored in the oven. They can�t stand the high heat.

3.

Wipe out any loose soil or grease. This WIII help reduce smoke duringthecleanlng cycle.

4. If your oven has a rotisserie. make sure the motor socket cover is closed. 5. Put oven rocks on the second and fourth guides. During the SelfCleaning Cycle they will darken and become horder to slide. See tips on page 22. If you wont the oven rocks to remain shiny, Clean them by hand.

Cleon Door Cleon Frame

The porcelain reflector bowls may be cleaned in the oven. . Put the oven rocks on the second and fourth guides. l Wipe the reflector bowls of loose soiled and grease. l Place 2 bowls, upside down on each rack. For best resulk. they should not touch each other or the oven walls. l Chrome trlm rlngs must not be cleaned In the oven. They will discolor.

Turn on the vent hood or other kitchen vent during the cleaning cycle. This will help remove smoke. odor and heat that ore normal during the cycle, I SPECIAL CAUTIONS: DO NOT use commercial oven cleaners In your oven. Damage to the porcelatn finish may occur DO NOT force the Lock Lever, you could bend or break It. The lever IS designed to stay locked until the oven iS cool enough to safely open. Wait until it moves freely, DO NOT use 1011 other liners in the or oven. During the cleaning cycle foil con burn or melt and damage the oven surface. 20