SONY RM-PJM600
Instrukcja Serwisowa

1-12 VPL-X600

4

Press the PATTERN key on the control panel to display the H pattern, and turn the focus ring to adjust the focus.
HHHH HHHH HHHH HHHH HHHH HHHH HHHH HHHH HHHH HHHH

Press the PATTERN key again to clear the pattern.

5 6

Turn the zoom ring to adjust the size of the picture. Turn the focus ring again to adjust the focus.

Note

Do not look into the lens when the projector lamp is on. To Adjust the volume Cut off the sound Press the VOLUME +/� keys on the control panel or on the Remoter Commander. the AUDIO MUTING key on the Remote Commander. To restore the sound, press the AUDIO MUTING key again or press the VOLUME + key. the PICTURE MUTING key on the Remote Commander. To restore the picture, press the PICTURE MUTING key again.

Cut off the picture

To get the clearest picture
You can get the suitable picture when a signal from the computer is input. Press the APA key on the Remote Commander or on the control panel. The picture is automatically adjusted to be projected clearest.
Notes

� Adjust the signal when the still picture is displayed on the screen. � If you switch the input signal or re-connect a computer, press the APA key again to get the suitable picture. � �ADJUSTING� appears on the screen. Press the APA key again during the adjustment to restore the original screen. � �Complete!� appears on the screen when the picture is adjusted properly. The picture may not be adjusted properly depending on the kinds of input signals. � Adjust DOT PHASE in the INPUT SETTING menu when you adjust the picture manually.
For details on DOT PHASE, see page 28 (EN).

23 (EN)