PANASONIC RRQR100
Instrukcja Obsługi

Timer recording and playback
�Timer recording
Recording can be set to start and �nish at set times. You must set the current time (see page 3).

�Timer playback
Playback can be set to start at set time. You must set the current time (see page 3). Timer playback cannot be selected while an empty folder is selected.

Preparation: Select the folder to record into. (page 6, step1)

Preparation: Select the folder and the �le you want to play. (page 6, steps1-2)

1 Press

[MODE] several times until the timer recording display is displayed.
RECF

1 Press

[MODE] several times until the timer play display is displayed.
PLAYF

Timer recording display

Timer play display

2 Within 10 seconds, turn
[PLAY/STOP, SEL] to select �On�.
RECF

2 Within 10 seconds, turn
[PLAY/STOP, SEL] to select �On�.
PLAYF

3

Set the times.

3

Set the times.

1 Within 10 seconds, press [PLAY/STOP, SEL]. The start time �ashes. 2 Within 10 seconds, turn [PLAY/STOP, SEL] to change the start time.
Start time
PM

1 Within 10 seconds, press [PLAY/STOP, SEL]. The start time �ashes.
B

RECF

2 Within 10 seconds, turn [PLAY/STOP, SEL] to change the start time.
B
PLAY F

Start time

PM

3 Within 10 seconds, press [PLAY/STOP, SEL]. The start time is set and the �nish time �ashes. 4 Within 10 seconds, turn [PLAY/STOP, SEL] to change the �nish time.
Finish time
PM

B
RECF

3 Within 10 seconds, press [PLAY/STOP, SEL]. The start time is set. The display changes in the following order indicating completion of the settings. Playback start time # Selected �le number # Normal display The timer playback stops automatically.

5 Within 10 seconds, press [PLAY/STOP, SEL]. The display changes in the following order indicating completion of the settings. Recording start time # Recording �nish time # Current number of �les # Normal display
The timer indicators (RECF and PLAYF) light to show which timer is set and �ash when the timer is operating.

To cancel the timer:
Select �OFF� in step 2 and press [PLAY/STOP, SEL].

To check the timer settings:
Press [MODE] several times until the timer display is displayed. The display will then change to show the following automatically. Timer recording: Start time, �nish time, folder the �le will enter. Timer playback: Start time, folder and �le to be played. Note . �The two timers cannot be used together. The timer set last is activated. �The timers can only be set within a single twenty-four hour period. The recording timer can only be set if there is one minute or more of available recording time. �If you make recordings before timer recording begins, be aware that the time available is reduced. The timer recording can only continue as long as the available time allows. �If VAS is left on during timer recording, the recording may be shorter than the set time. �The timer settings are canceled if the clock is cleared (i.e. the batteries are removed from the battery compartment).

9

10