�Use HQ or SP if the sound source is far away.
ERASE
H L
You can also change the microphone sensitivity and VAS setting. (See below)
3 Press [REC] to start recording.
The recording indicator lights. Each time you press [$FOLDER/%MENU]: Recording time Recording level Available recording time File number �Available recording time also Recording time appears when the remaining time becomes very short.
B
0�����50����100� 0�����50����100�
STO
MIC SENSE
HQ
HQ
,.
M S
B
,.
H
H
M
S
Available recording time
� Recording through the external microphone
The built-in microphone switches off.
RR-QR153
4 Press [STOP] (or [�]) to stop recording.
Information for the �le appears one after the other: Remaining memory
HQ
0�����50����100� 0�����50����100�
Connect the included microphone to the [MIC] jack.
RR-QR150
HQ
HQ
HQ
HQ
Use a condenser microphone without a built-in power supply. Plug type: 3.5 mm (1�8 in.) monaural
B
REC DATE
PM M D
B
REC DATE
B
B
B
PM H M S
Date
Time
Recording time
No. of �les
Clock
Changing microphone sensitivity
H
MICROPHONE
Timer recording
Preparation: Select the folder and recording quality (Steps 1 and 2 above). 1 While stopped, press and hold [$FOLDER/%MENU] until the display changes. Do each of the following within 10 seconds 2 Press [$FOLDER/%MENU] until �RECF� appears. 3 Press [:,9] to select �On�. 4 Press [1]. 5 Set the times.
1 2 3 4 Press [:,9] to change the start time. Press [1]. Press [:,9] to change the end time. Press [1].
L
0 50 100
H (High): Relatively soft sounds are recorded.
FOLDER/ MENU
REC MODE
H L
L (Low): Only relatively louder sounds are recorded. Use when recording close
ERASE
MIC SENSE
H L
to the mouth.
Preventing unnecessary recording (VAS: Voice activated system)
VAS detects silence and pauses recording automatically. It is especially effective when microphone sensitivity is set to L.
MIC SENSE
1 While stopped, press and hold [$FOLDER/%MENU] until the display changes. Do each of the following within 10 seconds 2 Press [$FOLDER/%MENU] until � � appears. 3 Press [:,9] to select �On�. 4 Press [1].
� � and recording indicator �ash while VAS is waiting for a sound to record.
When �nished, the display changes in the following order: ON time # OFF time # Current number of �les # Clock �RECF� �ashes during recording and goes out when �nished. (The setting is also canceled.)
� To check the timer settings:
1 While stopped, press and hold [$FOLDER/%MENU] until the display changes. 2 Within 10 seconds, press [$FOLDER/%MENU] until �RECF� appears.
� To cancel the timer:
Select �OFF� in step 3. �Start from the beginning again if the display returns to the clock partway through. �Press [STOP] or [�] to stop partway through.
� To turn the function off:
Select �OFF� in step 3. �Start from the beginning again if the display returns to the clock partway through. �Press [STOP] or [�] to stop partway through.
