Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 22 (kliknij aby zobaczyć)
5. Push the Delay Start Time pad. The time of day with the colon flashing will show on the display and START TIME will light up.
6. Use the Hour and Minute pads to set the desired start time. Push the �up� (A) or �down� (V) pad(s) until the correct time shows on the display.
This example shows a desired start time of 2 o�clock. The oven will automatically shut off at 2:30 (the set start time plus the set cook time).
7. Push the Start/Enter pad. DELAY and BAKE will light up on the display to show that the oven is programmed to start at a later time. NOTE: The display will show �door� and a tone will sound once a minute for five minutes if the door is latched when you try to bake/ roast. You can change the temperature or time settings any time after pushing the Start/Enter pad by repeating any of Steps 2 through 6. 8. When the start time is reached, a 1-second tone will sound and DELAY will go off. The display will show the set cook time. �Lo��, HEAT, TIMED, and BAKE will light up on the display to show that the oven is heating. The display will count down the baking/roasting time in minutes. 9. When the baking/roasting time is completed, the oven will turn off automatically, beep four times, and �End� will show on the display. You will also hear four 1-second tones every minute until you push the Off/ Cancel pad. NOTE: To disable reminder tones, push and hold the Cook Time pad for four seconds. To reactivate tones, repeat this procedure.
