|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Changing
the light
bulb
Electrical Shock Hazard Unplug the refrigerator before removing light bulb. Failure to do so can result in death or electrical shock. To change refrigerator light: 1. Unplug the refrigerator. 2. Reach behind Control Panel to remove bulb. 3. Replace with a 40-watt appliance bulb. 4. Plug in the refrigerator. NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size and shape.
Understanding
the sounds
you may hear
or snapping sounds
Your new refrigerator may make sounds that your old one didn�t. Because the sounds are new to you, you might be concerned about them. Don�t be. Most of the new sounds are normal. Hard surfaces like the floor, walls, and cabinets can make the sounds seem louder. The following describes the kinds of sounds that might be new to you, and what may be making them.
Clicking
The thermostat makes a definite click when the refrigerator stops running. It also makes a sound when the refrigerator starts. The defrost timer will click when the defrost cycle starts.
Water
sounds
When the refrigerator stops running, you may hear gurgling in the tubing for a few minutes after it stops, You may also hear defrost water running into the defrost water pan.
Slight
hum,
soft
hiss
fan motor
You may hear the refrigerator�s and moving air.
13
|
