Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 13 (kliknij aby zobaczyć)
Canceling
a cycle
You can cancel a cycle at any time. 1. Turn the Cycle Control Knob slowly clockwise until you hear water draining. Let the dishwasher drain completely. 2. Open the door. 3. Turn the Cycle Control Knob to OFF.
Selecting
cycle
options
You can select an option washer starts as long as passed the point that the example, you can select DRY any time before the Knob reaches DRY.
after the dishthe cycle has not option is used. For ENERGY SAVER Cycle Control
HEATED
DRY option
If the HEATED DRY option is selected, air in the dishwasher is heated during the �dry� part of the cycle. For best results, use a liquid rinse agent and select HEATED DRY. NOTE: For models with 7 buttons: Select RESET OPTIONS if the ENERGY SAVER DRY option was selected for the previous cycle.
Models with Rocker Switch
Models with 3or5
Models with 7
buttons
buttons
ENERGY
SAVER
DRY option
OR
If the ENERGY SAVER DRY option is selected, air in the dishwasher is not heated during the dry part of the cycle. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting may result. Some items (such as plastics) may need towel drying. For best results, use a liquid rinse agent.
Models with Rocker Switch
Models with buttons
LOW ENERGY option
(on some models)
WASHING
When the LOW ENERGY WASHING option is selected, water heating is reduced during the main wash and final rinse. This will reduce the amount of electricity needed to run the dishwasher. However, dishes may not wash as well.
